JEEP® BRAND ELECTRIFIED TECHNOLOGY

 HOW WILL YOU POWER THE ADVENTURE?

All-electric or plug-in hybrid—choose from two dynamic 4xe technologies, each engineered to deliver an uncompromising and epic journey.

ALL-ELECTRIC, PURE ADVENTURE

Jeep® Brand Battery Electric Vehicles (BEV) trade a traditional combustion engine for electric motors and run on pure electricity. A cutting-edge battery emits zero emissions while powering the vehicle into action.

Preproduction Wagoneer S model shown. Actual production vehicle and features may vary. Coming early 2025.

THE BLUEPRINT FOR ALL-ELECTRIC ADVENTURE

YES, YOU CAN HAVE BOTH

Jeep® Brand plug-in hybrid technology pairs a traditional gas engine with an electric motor for dynamic power and range.

 

When in Electric Mode, Jeep 4xe plug-in hybrid vehicles offer near silent pure EV-driven performance. Plus, you can adjust the electric output to suit different driving conditions, recharge and do it all over again.

Do not attempt water fording unless depth is known and consistent with the vehicle’s water fording rating in the Owner’s Manual. Traversing water can cause damage that may not be covered by the new vehicle warranty. Always off road responsibly in approved areas.

HYBRID MODES AND MECHANICS
HYBRID MODES AND MECHANICS
MAXIMUM HORSEPOWER MEETS INSTANT TORQUE

HYBRID MODE

The default Hybrid Mode combines torque from both the 2.0L turbocharged engine and the electric motor. This combination provides maximum horsepower, instant torque and thrilling acceleration. In this mode, electric power is consumed first.

ELECTRIC MODE

When the battery has more than a 1% charge, it can run in Electric Mode. This allows for near-zero tailpipe emissions up to highway speeds. The vehicle can run in this mode for up to 21 miles on Wrangler 4xe and up to 25 miles on Grand Cherokee 4xe.

eSAVE MODE

eSave Mode prioritizes the 2.0L engine, saving battery charge for later use. When power demand is low, the engine shuts off. It can also be reconfigured to increase the battery charge as well.

REGENERATIVE BRAKING

This feature allows the battery to be charged when decelerating and braking. The Max Regeneration feature remaps the accelerator pedal to command more aggressive regeneration at low pedal positions. It allows you to slow the vehicle down without the brake pedal, but a complete stop always requires the brake pedal. It also stays selected until you turn it off.

RECHARGE

The battery can be fully charged in approximately 2 hours using an available Level 2 charger (240-volt), or 12 hours using the included Level 1 charger (120-volt). With the ability to charge at home and work, you can enjoy the benefits of fully electric daily commutes.

THREE WAYS TO CHARGE

There are three levels of electric charging. Each offers different charging times and options between battery electric and plug-in hybrid technologies.

LEVEL 1

The Level 1 (120-volt) charging system comes standard on Jeep® plug-in hybrid models and is available on Jeep battery electric models. It conveniently plugs into any typical household outlet.

• For plug-in hybrid vehicles, it takes 10 hours to deliver a full charge

• For battery electric vehicles, it takes 3 days to deliver a full charge

LEVEL 2

The available Free2move Charge Level 2 Charger (240-volt) makes it easy to charge at home. It features an alternating current for up to 10-19 kilowatts of power. It requires professional home installation.

• For battery electric vehicles, it takes 8-10 hours to deliver a full charge

• For plug-in hybrid vehicles, it takes 2.5 hours to deliver a full charge

LEVEL 3

Level 3 chargers (400+ volts) offer DC fast-charging capability found only at public charging stations. The Free2move Charge app makes it easy to find, activate and pay for public charging all in one app. These charging stations also only apply to battery electric vehicles.

• For battery electric vehicles, Level 3, more commonly known as DC Fast Charge, takes 15-60 minutes to deliver a full charge

EASY AT-HOME CHARGER INSTALLATION

Our partners at Qmerit make at-home available Level 2 charger installation simple. For most home configurations, it’s as easy as providing some information about your home layout and electrical panel. The free estimate takes 5-10 minutes, and you decide when to move forward.

CONVENIENT SCHEDULING

Quickly receive an estimate and schedule your installation at a time that works for you.

VETTED PROS

A background-checked, licensed professional will complete the job.

SATISFACTION GUARANTEED

Over 10,000 quality EV charging installations have been performed.

THE ELECTRIC LIFE IS EASY

Jeep® Connect and Wagoneer Connect add more smarts to your smartphone by letting you manage the journey.

REMOTE VEHICLE OPERATIONS

Lock and unlock your doors or flash your lights remotely.

TRIP INFORMATION

Monitor speed and boundaries when your loved ones drive the vehicle.

CHARGING NEAR YOU

View a map of nearby charging stations and plan a seamless route.

AN ELEC­TRIC
IMAGI­NATION

For years, Jeep® Brand designers and engineers have been at the drawing table, architecting the future of electric adventure. Easter Jeep Safari™ and auto show stages have showcased dynamic, boundary-pushing SUVs that point toward what’s possible.

MAGNETO 3.0 CONCEPT

The Magneto 3.0 Concept builds on the legacy of its predecessors, delivering a truly electrifying experience with 650 maximum horsepower, 900 pound-feet of maximum torque and a two-stage Regeneration Mode.

JEEP® WRANGLER RUBICON 4xe CONCEPT

The Jeep® Wrangler Rubicon 4xe Concept ups the ante on bold plug-in hybrid design, taking inspiration from the beloved special-run Tuscadero exterior paint color.

1978 CHEROKEE 4xe CONCEPT

Don’t be fooled by the glossy retro exterior. The 1978 Jeep® Cherokee 4xe Concept is a modern, electrified off-road performer to the core.